| 玻璃钢桥架安装要求有哪些 |
| 添加时间：2017/8/30 21:14:13 浏览次数： |
| 玻璃钢桥架的安装应该严格安装相应标准执行安装，确保安装工程的顺利施工。安装玻璃钢桥架有以下几点要求： FRP Bridge installation should be strictly installed, corresponding standards, installation, to ensure the smooth construction of installation works. Installation of glass reinforced plastic bridge has the following requirements: 1.直线段玻璃钢桥架长度超过30m，铝合金或玻钢制桥架长度超过15m时，设有伸缩节玻璃钢桥架跨越建筑变形缝处设置补偿装置. 1. the length of the glass bridge is more than 30m. When the length of the aluminum alloy or glass steel bridge exceeds 15m, it is equipped with a telescopic joint, and the glass steel bridge spans the deformation joint of the building to set up the compensation device 2.玻璃钢桥架应在下列地方设置吊架或支架： 2. glass bridges shall be provided with hangers or supports in the following places: 2.1桥架接头两端0.5m处; 2.1 bridge joints at both ends of 0.5m; 2.2每间距1.5～3m处; 2.2 1.5 to 3m at each interval; 2.3转弯处; 2.3 bend; 2.4垂直桥架每隔1.5米处. 2.4 vertical bridge, every 1.5 meters 3.吊架和支架安装保持垂直、整齐、牢固、无歪斜现象。 3. the hangers and brackets should be installed vertically, neatly, firmly and without distortion. 4.桥架连接板螺栓固定紧固无遗漏，螺母位于桥架外侧。 The 4. bridge connecting plate bolt is fixed and fastened, and the nut is positioned outside the bridge frame. 5.缆桥架应敷设在易燃易爆气体管道和热力管道的下方。 The 5. cable bridge shall be installed below the flammable and explosive gas pipelines and heat pipes. |
| 上一页 玻璃钢桥架的优越性 |
| 下一页 玻璃钢桥架的性能 |
Copyright © 技术支持：遨游网络